Hook Lifts -
Standard & Customised Versions
Range: From 1 ton up to 80 tons lifting capacity
Suitable for 2 axles/3 axles/4 axles & 5 axles Truck Chassis, Agricultural Trailers & Semi-Trailers
Basically, there are four kinds of EOS-ENVIRO Hook Lift layouts available:
EOS-ENVIRO Hook Lifts with Sliding Arms (only 1 point of articulation) load the container/bin with an angle of approx. 25° - Devices with Articulated Arms (2 points of articulation) are being operated with an angle of approx. 23° whilst lifting. That allows loading of payloads with a lower lifting angle - compared with sliding units.
Due to the articulated hook arm containers/bins with lower hook eye's heights can be also handled, because the hydraulic arm could be lowered to a level below the hook lift's subframe/truck chassis and a steeper tilting angle (up to 67°) is achieved.
In order to ensure a smooth operation of longer bins (up to 7,500 mm), the EOS-ENVIRO Hook Lift Range with Double Extensible/Telescopic Arms has been introduced. This kind of design has been also the basic in regard to our recently patented EOS-ENVIRO Hook Lift SML 485 for payloads with a length of max. 9,000 mm respectively 14,300 mm.
Our newest development is truly a technical revolution: The EOS-ENVIRO 40' Heavy Duty Hook Lift Module ContiLift TBS-40 with Rotating Arm and with lifting capacities up to 80 tons available and suitable for modified hook lift containers/bins with a max. length of 12,200 mm/13,700 mm.
To avoid an accidental tip over during lifting and tilting, all EOS-ENVIRO Hook Lift Devices can be equipped and supplied with a vertically descending, hydraulically operated Rear Roll Stabilizer.
Our customized and standardized EOS-ENVIRO Hook Lift Ranges - supplied with a contractual manufacturer's warranty of 2 years on structural parts and of 1 year on hydraulic components - are suitable for all commonly used truck/lorry chassis - acc. to DIN, ADRs & CHEM & STANAG 2413 Standards - and are coming with a CE Certificate acc. to EU Machinery Directive 2006/42/CE !
One Hook Lift Truck + One Driver =
Design acc. to DIN, CHEM (TS 13 & 17), STANAG 2413 & ADRs (3rd Edition) Standards also available !
Configurate your personal EOS-ENVIRO Hook Lift Module now:
Options and customized appliances are available on request. We retain the right of technical alterations without prior notice.